How ToReviews

Why Is My Samsung T.V Dark?

Why Is My Samsung T.V Dark?


Why is my Samsung T.V dark at top of screen?

Hello guys today i have bought you a complete tutorial. In which you will get to know why is my samsung tv dark. How you can fix this by your own possibly if it does not have any hardware issue.

Resolving Dark or Dim picture on Samsung TV is completed by changing the settings which are as follows:

1. Disable Energy Saving Setting

2. Change the image Mode

3. Disable The Ambient Light Detection

4. It is caused by weak signal strength and signal quality of the connected devices.

5. Try and Reset Picture Setting and check

6. Kindly perform Self Diagnosis

7. Kindly check by Updating TV Software.

8. Kindly Reset the TV.


Why Is My Samsung T.V Dark?

How Do I Fix The Brightness On Samsung TV?


There are few procedures on fixing the fault on the screen of Samsung TV, but some of them are discussed here:

  1. 1. Press Menu button on your Samsung TV remote.
  2. 2. Navigate to SUPPORT and Press Enter.
  3. 3. Navigate to SELF designation and press Enter.
  4. 4. Highlight RESET and press Enter.
  5. 5. If you have modified the PIN, enter the PIN you saved. (The default PIN is 0000)
  6. 6. The TV can then reset and reboot

Follow the on-screen instructions to finish the initial setup when the TV powers back on. The TV will not show black screen.

Fix Samsung TV With A Firmware Update

Certain Samsung TVs have had a difficulty with firmware updates. If you’ve got a Samsung TV and therefore the screen goes black randomly. Try the steps below to search out if the TV has a difficulty with a connected component or a firmware issue:

  1. Check to search out if you’ll be able to pull up the TV menu. If you’ll be able to pull up the menu, this issue is coming from one in every of your sources. Check and reset all components/sources.
  2. If you’re ineffectual to drag up the TV menu, update the TV firmware.

Fix TV With HDCP Issues

Some TVs have reported HDCP issues. This issue occurs when handshake has been not occurred between the 2 components

– HDCP (High-bandwidth Digital Content Protection)

  1. Turn OFF then ON again.
  2. Get in the TV menu and update the firmware to prevent the HDCP issue.

Repair a TV that also Shows Black Screen

If the problem of the TV showing a black screen remains not resolved, you’ll try and claim warranty or fix the TV yourself. In many cases, this issue is caused by :

  • Bad Driver Board
  • LEDs,
  • A faulty T-Con board within the TV.
  • Loose cable or ribbon connector
  • Capacitors

You may must take the TV apart and diagnose the difficulty. Don’t repair your Samsung TV until and unless you exactly know the entire process of repairing.

Related Articles

Check Also
Back to top button